Integrated System Sdn. Bhd. (IES) Website

MAGi-2 SERIES

MICROPROCESSOR CONTROLLERS FOR ACCESS CONTROL APPLICATION

Click here to download brochure

General Description

The MAGi-2 Card access controllers are our next Generation of access controllers. It is built with the latest of technology from Texas Instruments, the MSP430 series of micro-controllers. It is built to meet the ever increasing demand for a cost effective, reliable and feature packed card access controller. Microprocessor based applications, in almost every field, has become packed with user-friendly features. Security is of no exception. This puts greater demand on the speed and reliability of communications and on larger and faster memories.

The MSP430 processor was chosen with these in our minds. The feature of the processor permits us to reduce component count and therefore increase reliability. SMT (Surface Mount Technology) is used for circuit board layout to reduce RF emission. Processor speed has been doubled from conventional processors to 8 MHz clock (4MHz Bus speed).

Furthermore, the MAGi-2 supports communications speeds up to 4800 baud that is double from the 2400 baud on most card access control of its class. Reliability is achieved via the use of industry standard RS422 for communications which has a high noise immunity characteristic.

What is more, the MAGi-2 can be networked with the other MAG series family and be driven from the MicroPlus software. A budget MicroPlus Lite is available just for systems with a maximum of 16 MAGi-2 installed.

Technical Specifications

1.	Card Holders base	1000 normal
2.	Transactions storage	256 transactions, 768 extended memory (optional)
3.	Power Features	REQUIRES 12VAC/VDC source at 3 Amps Minimum Comes complete with a power management module. Able to manage a 7AH/12V Sealed Lead acid battery.
4.	Alarm Output	On Remote Relay Unit for local siren activation (optional)
5.	Door	Yes. On board Relay will release any electronic lock.

Hardware Specifications

1.	Processor	16 bit MSP430 CMOS MCU
2.	Clock	8.000 MHz
3.	Memory	32KB Flash Memory 1KB Static RAM. 8K Bytes EEPROM (Expanded 24KB)
4.	Real Time Clock	Philips PCF8563, battery backed
5.	Current Consumption	200mA Max (excluding reader)
6.	Communications (1 port)	IEC RS422
7.	Power Supply (included)	12VAC/VDC 3A. Power Management Module. 3V6, 60mA Lithium re-chargeable battery for clock backup.

Special Functions

1.	Timers	30 timers, with 3 valid periods
2	Timezones	30 timezones, with holiday processing
3	Holidays	32 holidays, with special handling for alternate Saturday holidays
4	Antipassback	Yes.
5	Push button	With timezone control
6	Pin mode	With timezone control
7.	Exit Reader	Configurable with or without timezone control
8	Duress Alarm	With pin mode only
9	User Select Pin	Yes
10	Standalone	Can function normally standalone

Note: Specifications can change without prior notice

Reader Attachments

The MAGi-2 will use any readers with a Wiegand interface of 16 to 42 bits. However, because of the varied number of protocols that can exist on those readers, please submit your enquires via your dealers to us to confirm if the devices with these attachments can be used.

Integration and System

The MAGi-2 can be integrated together to form a system that extends to cover the entire installation. The software package that does this is the IES MicroPlus software. At the entry level, MicroPlus Lite allows for either a 16 controller budget system consisting of only MAGI-2. Other versions of MicroPlus allow the MAGi-2 to be mixed with other MAG series equipment to form a 64 controller system depending on the type of communications hardware that is used. MicroPlus versions that allow controller configurations of 64,000 controllers are available on request only.

This means that expansion from 16 to 64 does not require any messy software upgrade or change. At the mid-end, 512 MAG-X controllers can be networked together. At the very maximum, 64000 MAG-X controllers can be networked together.

The network utilizes industry standards like RS422 and LAN (802.3), TCP/IP communications protocol. By using the LAN/WAN technology, geographical barriers does exist. Access controllers can be located half-way round the world and yet be online without problems.

Extended Systems

In the extended systems configuration, the MAGi-2 can work together with other families of equipment. For example, the Digital Field Panels from IES are alarm monitoring devices and can be networked together with the MAGi-2, on the same bus if necessary. Together with the powerful MicroPlus software, a sophisticated system which serves the full security solution of most installations, can be constructed. This includes a seamlessly integrated system to print and produce badges with the MicroPlus Badgemaker Software.

For the full description of the MicroPlus environment, please consult the MicroPlus brochure.